tiller bracket

Use this tiller bracket to attach a tiller to the rudder head. Made from electropolished stainless steel, 9"L x 1.5"W, with one 3/8" hole at the rudderhead end, and two 1/4" holes for through-bolting to the tiller. Tiller shim kits increase the width of the tiller to fit the exact rudder thickness. Made of HDPE, the shim kits are pre-drilled with holes to match the tiller bracket Use a single shim or multiple shims in combination to add whatever thickness is required
49.99 USD

Tiller Brackets Mounts the activating rod above or below the tiller, measured in vertical distance from the tiller. Use 4" or 5" Heavy Duty Brackets for ST2000+/ST4000+/ST4000+GP Push-Rod Extensions For tiller models. Screws into end of the standard push rod. Two can be screwed together if extra length is required. Pedestal Raises the height of mounting positions for tiller models. Unscrews from bare plate when not in use to allow clear working space. Includes bolts, washers, and locking plate. Aluminum. Drive Belts For wheel-steering autopilots Check your owner's manual for proper offset and adjustments required. Home Improvement
34.99 USD

Tiller Brackets Mounts the activating rod above or below the tiller, measured in vertical distance from the tiller. Use 4" or 5" Heavy Duty Brackets for ST2000+/ST4000+/ST4000+GP Push-Rod Extensions For tiller models. Screws into end of the standard push rod. Two can be screwed together if extra length is required. Pedestal Raises the height of mounting positions for tiller models. Unscrews from bare plate when not in use to allow clear working space. Includes bolts, washers, and locking plate. Aluminum. Drive Belts For wheel-steering autopilots Check your owner's manual for proper offset and adjustments required.
34.99 USD

Tiller Brackets Mounts the activating rod above or below the tiller, measured in vertical distance from the tiller. Use 4" or 5" Heavy Duty Brackets for ST2000+/ST4000+/ST4000+GP Push-Rod Extensions For tiller models. Screws into end of the standard push rod. Two can be screwed together if extra length is required. Pedestal Raises the height of mounting positions for tiller models. Unscrews from bare plate when not in use to allow clear working space. Includes bolts, washers, and locking plate. Aluminum. Drive Belts For wheel-steering autopilots Check your owner's manual for proper offset and adjustments required.
34.99 USD

Stainless steel pin for use with the Cantilever Bracket (Model 157107).
9.99 USD

Tiller Extension These 30" Tiller Extension Handles are designed to be used with the Minn Kota Anchoring Systems.
29.99 USD

Retaining clip for tiller.
9.79 USD

Use this tiller bracket to attach a tiller to the rudder head. Made from electropolished stainless steel, 9"L x 1.5"W, with one 3/8" hole at the rudderhead end, and two 1/4" holes for through-bolting to the tiller. Tiller shim kits increase the width of the tiller to fit the exact rudder thickness. Made of HDPE, the shim kits are pre-drilled with holes to match the tiller bracket Use a single shim or multiple shims in combination to add whatever thickness is required
12.99 USD

Minn Kota E Drive Tiller-Steer Primary Propulsion Motor (2 Horse Power, 20" Shaft) For "gasoline-restricted" lakes, our E-Drive motor's convenient Tilt Tiller provides primary propulsion and comfortable, ergonomic control Minn-Kota trolling motor, Owners manual, Warranty card Easy-to-see realtime battery gauge Clamp on transom bracket mounts Stainless steel propeller
2319.88 USD

Tiller Clips Molded of Marelon for exceptional strength
3.49 USD