diaphragm pump page 7

Rugged 11' x 4'8" Inflatable boat featuring super thick 38 mil Polykrylar hull material, wooden floorboards, two seats, motormount, oars, foot pump and repair kit.
549.00 USD

This new generation continuous rated bilge pump has a waterproof coating for wet environments. This pump offers 258gph capacity and is self-priming to 10'. With run-dry capability and thermal overload protection, it won t overheat. Nitrile impeller is fuel and oil resistant. Pumpguard strainer included with pump. Type: Multi-Chamber Diaphragm Dimensions: 7.73"L x 4.19"W Built-In Switch: No Material: Glass-Filled Polypropylene Warranty: One year
187.99 USD

Provides smooth quiet water flow without pulsation Converts Conventional Water System Pumps to Variable Speed Drive. Variable Speed Drive (VSD) converts everyday pumps into sensor-controlled pumps that automatically adjust in real time to changes in pressure. As more or less flow is required the pump adjusts the voltage to your existing pump motor providing smooth and pulsation-free water flow. Adjusts for multiple fixtures Eliminates temperature variation Eliminates need for space consuming accumulator tank Works with most multi-chamber diaphragm water pressure pumps Easy-to-install Simple in-line installation Runs on 12 or 24 VDC input Not compatible with Flojet 4405 and Jabsco 31295? 31395 series pumps
127.99 USD

Designed for our Sport Boats, PaddleSkis, & Kayaks (except the SE-330), the MB-100 high speed electric pump is specifically designed for higher pressure inflatable boats. Hooks up to a car battery. Just set the pressure gauge to the desired pressure and turn on.
89.00 USD

Kit includes Diaphragm Ppulsation dampener Valve plate Valve set (inlet and outlet) Jabsco Service Pars Manual Please note: Kit does not include Connecting Rod (SKU 4573671 / Mfg #37173-0001).
17.99 USD

Quad DC Water System Pump - 12v - 10% Off Red Tag Sale! Price shown reflects 10% discount. Quad DC Watere System PumpsSelf-priming diaphragm pump with 12v DC electric motor. Flow rates up to 3.3 gpm, pressure switch control, capable of pressures up to 35 psi.Features:Self-primes up to 2.4m vertical liftFour-piston design delivers higher flow ratesQuick-connect plug-in ports for easy installationPressure-switch control to run the pump only as needed
98.00 USD

Ranging in capacities from 2.4 to 7.0 gallons per minute, all pumps feature ignition-protected, corrosion-resistant designs. 2.4gpm pump (a West Marine exclusive!) offers moderate pumping capability at an outstanding price. Pumps plumb to 1/2"ID water system hose. All pumps are self priming and also have the ability to run dry. Material: Polypropylene pump body, Santoprene diaphragm, EPDM valves Port Sizes: 1/2"-14 male pipe; 1/2" hose barbs Warranty: Three years
119.99 USD

Ranging in capacities from 2.4 to 7.0 gallons per minute, all pumps feature ignition-protected, corrosion-resistant designs. 2.4gpm pump (a West Marine exclusive!) offers moderate pumping capability at an outstanding price. Pumps plumb to 1/2"ID water system hose. All pumps are self priming and also have the ability to run dry. Material: Polypropylene pump body, Santoprene diaphragm, EPDM valves Port Sizes: 1/2"-14 male pipe; 1/2" hose barbs Warranty: Three years
139.99 USD

Gusher Urchin Manual Pump W/ Fixed Handle An ideal manual bilge pump for small to medium sized boats. This sturdy pump is self-priming and its easy lever action permits a fast pumping rate. The handle can be oriented in any direction and the diaphragm can be easily accessed for maintenance or removing debris. Different models allow deck, bulkhead or thru-deck installation. Stepped inlet nipples allow use of either 1 or 1- 1/2 hose. 1 hose and 3 ft. of lift: 7 GPM 45 strokesmin; 11.4 GPM 70 strokesmin. 1 hose and 6 ft. of lift: 7 GPM 45 strokesmin; 10.6 GPM 70 strokesmin. 1- 1/2 hose and 3 ft. of lift: 9.9 GPM 45 strokesmin; 14.5 GPM 70 strokesmin. 1- 1/2 hose and 6 ft. of lift: 9.5 GPM 45 strokesmin; 14 GPM 70 strokesmin. Ideal for use where space is limited Maximum self-priming height - 13- 1/2 ft. Maximum head - 10 ft. Hose connections - 1 or 1- 1/2
66.85 USD

Gusher Urchin Manual Pump W/ Removable Handle An ideal manual bilge pump for small to medium sized boats. This sturdy pump is self-priming and its easy lever action permits a fast pumping rate. The handle can be oriented in any direction and the diaphragm can be easily accessed for maintenance or removing debris. Different models allow deck, bulkhead or thru-deck installation. Stepped inlet nipples allow use of either 1 or 1- 1/2 hose. 1 hose and 3 ft. of lift: 7 GPM 45 strokesmin; 11.4 GPM 70 strokesmin. 1 hose and 6 ft. of lift: 7 GPM 45 strokesmin; 10.6 GPM 70 strokesmin. 1- 1/2 hose and 3 ft. of lift: 9.9 GPM 45 strokesmin; 14.5 GPM 70 strokesmin. 1- 1/2 hose and 6 ft. of lift: 9.5 GPM 45 strokesmin; 14 GPM 70 strokesmin. Ideal for use where space is limited Maximum self-priming height - 13- 1/2 ft. Maximum head - 10 ft. Hose connections - 1 or 1- 1/2
82.98 USD