outboard engine flush kit

Inboard/Outboard/Jet Engine Flush 32 oz. QUART AND GALLON CONCENTRATE REFILL (Without Mixing Unit)After using the COMBO KIT (Quart with Mixing Unit), purchasing either a QUART or a GALLON of Salt-Away Concentrate are the recommended choices, depending on frequency of use, area to cover, and economic considerations.A customer may want to start using Salt-Away by purchasing a GALLON of Concentrate and a Mixing Unit.Mixing Units can be ordered independently of the Kits. Ask your favorite store to inquire about this option.22 Fluid Ounce (Quart Refill SA32)
19.99 USD

Inboard/Outboard/Jet Engine Flush 128 oz. The NEW Salt-Away products remove salt, salt build-up and rust from your engine's salt water cooling system. They're 100% Non-Hazardous, 100% Non-Toxic, and 100% Biodegradable!
44.99 USD

Inboard/Outboard/Jet Engine Flush w/Mixer Unit 32 oz. - Combo Kit Includes Mixing Unit! Just Connect the Mixing Unit and Start Safely Removing Salt from Your Boat, Trailer, and Everything Else! Salt-Away is a carefully selected blend of biodegradable ingredients, specifically chosen to provide the optimum concentration of well-known cleaning materials and surface-active agents, resulting in salt removal from a wide variety of surfaces. The beauty of this product is that it contains no hydroharbon solvents, thus it will not interfere or remove lubrication on items such as reels or engines, allowing it to be used pretty much anywhere on or around the boat. Along with salt removal, Salt-Away has built in corrosion inhibitors that stop corrosion before it starts. Use the Salt-Away Sprays or Mixing unit to apply, or alternatively, mix 1-2 ounces of Salt-Away per gallon to achieve optimal concentration.
41.99 USD

Mercury Marine Flushing Attachments Kit For 20hp+ Outboard Motors . For fresh water hook-up to a Mercury/Mariner engine for running at idle or for flushing of the block. Use care in choosing the correct application
32.99 USD

Seastar Outboard Steering All Brands Outboard Tiebar Kit Hc5345/47/50 Teleflex Marine SeaStar Outboard Steering All Brands - OUTBOARD TIEBAR KIT HC5345/47/50
429.94 USD

West Marine Engine Winterizing Kit . Winterize your outboard or sterndrive with this convenient kitUses your existing flusher and a garden hose to winterize your outboard or sterndrive engine, even while it s on the trailer. Kit includes a five-gallon jug, hose fittings and instructions for winterizing. You supply five gallons of nontoxic antifreeze for each engine. Complete instructions are included. Reusable.
49.99 USD

Teleflex Baystar Outboard Steering System . Hydraulic steering for outboards to 150hp Controlling large outboards with mechanical steering may require lots of effort. On the other hand, traditional hydraulic systems may be more than is needed on lower horsepower engines. BayStar brings safety, reliability and comfort of hydraulic steering to outboard powered boats like inflatable RIBs and runabouts with a maximum 150 HP (total) or less. The super low friction helm pump provides smooth comfortable steering. The balanced cylinder features a compact design that easily fits most splashwells 23" or less. BayStar Kits come complete with everything needed for an install. The cylinder utilizes the factory outboard engine supplied drag link for simplified installation. For your convenience two lengths of 20' cut to fit tubing are supplied (2 x 20' length). Kit includes Helm Pump, Cylinder, Tubing Kit, two bottles of hydraulic steering fluid and one fill tube for easy fill and purge. Boat Type: Single station, single engine boat with outboard up to 150HP. Not for lower-horsepower outboards that use wing nut type transom mount clamping screws Compact helm has only a 5" footprint, and requires only a 3" dash cutout. 4.5 turns lock to lock. Steering Wheel: Not included. Steering Wheel Shaft: 3/4" tapered Included Equipment: Helm pump HH4016, cylinder HC4645H, tubing kit (includes two 20' cut-to-fit hoses), filler kit and two bottles of hydraulic fluid Splashwell: 5"H x 6"D x 21"W minimum Warranty: Two years For PDF's of Teleflex documentation, including the BayStar/SeaStar Selection Guide and Installation Books, click here
499.99 USD

Seastar Outboard Steering Cylinders O/B Cylinder Kit Side Mount Available separately or included in SeaStarSeaStar Pro steering kits, these cylinders allow you to have the best of both worlds. You get simplicity because no adapter plates are required. The new cylinder bolts up directly to virtually any outboard. For single or twin non-power assisted outboard engines up to 300 HP or 600 HP total Use on cruisers, runabouts, center console boats, bass boats, offshore fishing vessels, etc. 4.5 turn lock-to-lock with SeaStar 1.7 helm; 4.0 turns lock-to-lock with SeaStar Pro 3/4 tapered shaft 20 less effort at hard-over than competitive systems Rigid tilt tube mount for no-compromise performance Unique pivoted tiller connection allows full engine articulation with independent tilt and trim on twin engines Improved bleeder fittings are integral with cylinder for greater durability and ease of use Painted components are anodized before coating for extra corrosion protection Small footprints fit virtually all splashwells Meets ABYC standards and NMMA requirementsNote: see engine application guide on each engine brand for cylinder applications.
481.94 USD

Moeller Inboard, I/o Engine Paint & Outboard . Durable, heat- and solvent-resistant acrylic lacquers formulated for use on all outboard and inboard engines, stern drive and lower unit applications. They are color-matched to original OEM colors and are a great way to protect your engine and make it look like new. 12oz. aerosol spray.
13.99 USD

Teleflex Seastar Outboard Hose Kits (two Hoses Per Kit) Kit, 20' Length . Easy installation, and made to fit most single/twin outboards A popular choice for unmatched comfort and control of your outboard, this steering system offers smooth and efficient steering for all hull types. Use with single outboards up to 300hp and dual outboards up to 600hp total. The kit contains a smooth front mount 1.7 c.i. displacement helm pump, semi-universal front-mount cylinder, two quarts of oil, bleeder kit and installation guide. Order the popular HK6300 kit complete with set of two 22' hoses, or purchase hoses separately. Your HO51XX hoses are available in even foot lengths. The compact helm has a 4-7/16" footprint and requires a 3" cutout. Meets ABYC standards and NMMA requirements. Maximum Horsepower: Single engine 300hp; dual engine 600hp Speed: 0 60mph Helm: 1.7 cu. ft. capacity Hose: 1,000PSI Turns Lock-to-Lock: 5 Included Equipment: Helm, cylinder and bleeder kit. Hoses (H051 series) sold separately. Steering Wheel: Not included. Steering Wheel Shaft: 3/4" tapered Installation: Tie bar (sold separately) is required for dual engines Warranty: Two years
172.99 USD