rubber half round molding

Teak Molding, Lg Quarter Round - 1/2" x 5'
18.99 USD

Teak Quarter Round Molding Quarter Round 1/2" Teak 5 ft. length.
10.28 USD

Teak Quarter Round Molding Quarter Round 3/8" Teak 5 ft. length.
7.05 USD

Hookit Half Round Pad 6 Hookit Half Round Pad 6" A permanently folded pad with a straight, rounded edge - perfect for inside radii, plank lines, etc. Hookit pad face provides easy attachment and removal of discs. Straight edge 1/4 radius Use with 3M Hookit discs Sold by the each
11.20 USD

Teak Wire Molding, in
37.99 USD

Half-skirt for kayaking when a full skirt is too muchThis pocketed half-skirt offers splash protection in milder sea states and warmer conditions when a full skirt may be overkill. Mount it by itself or over your full-enclosure spray skirt for easy access to your essentials. Two zippered pockets, one mesh pocket Sticky rubber rand and bungee deck attachment Fits most sea kayak cockpits
29.99 USD

6000 Series Half Facepiece Respirator Half Facepiece Respirator Small This is a NIOSH approved half facepiece respirator which is adaptable to a wide range of respiratory protection. Its low maintenance, comfortable design allows greater worker flexibility with the use of different types of cartridges and filters for a variety of work environments. Cartridges are simply twisted on or off the facepiece for easy replacement, allowing the easily cleaned facepiece to be reused. Single packs are ready to use and include: pair of 6001 organic vapor cartridges, 2 pair of 5P71 P95 particulate filter, pair of 501 cartridge retainers All 3M Facepiece Respirators can be used with ANY of 3M's vapor cartridges and pre-filter combinations. The simple white, oblong pre-filters are held on to the cartridge with a 501 adapter. All round pre-filters, when used on a vapor cartridge, attach to a 502 adapter. All round pre-filters can also attach directly to a facepiece when only particulate (NOT vapor) protection is required
14.18 USD

6000 Series Half Facepiece Respirator Half Facepiece Respirator Medium This is a NIOSH approved half facepiece respirator which is adaptable to a wide range of respiratory protection. Its low maintenance, comfortable design allows greater worker flexibility with the use of different types of cartridges and filters for a variety of work environments. Cartridges are simply twisted on or off the facepiece for easy replacement, allowing the easily cleaned facepiece to be reused. Single packs are ready to use and include: pair of 6001 organic vapor cartridges, 2 pair of 5P71 P95 particulate filter, pair of 501 cartridge retainers All 3M Facepiece Respirators can be used with ANY of 3M's vapor cartridges and pre-filter combinations. The simple white, oblong pre-filters are held on to the cartridge with a 501 adapter. All round pre-filters, when used on a vapor cartridge, attach to a 502 adapter. All round pre-filters can also attach directly to a facepiece when only particulate (NOT vapor) protection is required
14.18 USD

6000 Series Half Facepiece Respirator Half Facepiece Respirator Small This is a NIOSH approved half facepiece respirator which is adaptable to a wide range of respiratory protection. Its low maintenance, comfortable design allows greater worker flexibility with the use of different types of cartridges and filters for a variety of work environments. Cartridges are simply twisted on or off the facepiece for easy replacement, allowing the easily cleaned facepiece to be reused. Single packs are ready to use and include: pair of 6001 organic vapor cartridges, 2 pair of 5P71 P95 particulate filter, pair of 501 cartridge retainers All 3M Facepiece Respirators can be used with ANY of 3M's vapor cartridges and pre-filter combinations. The simple white, oblong pre-filters are held on to the cartridge with a 501 adapter. All round pre-filters, when used on a vapor cartridge, attach to a 502 adapter. All round pre-filters can also attach directly to a facepiece when only particulate (NOT vapor) protection is required
43.58 USD

6000 Series Half Facepiece Respirator Half Facepiece Respirator Medium This is a NIOSH approved half facepiece respirator which is adaptable to a wide range of respiratory protection. Its low maintenance, comfortable design allows greater worker flexibility with the use of different types of cartridges and filters for a variety of work environments. Cartridges are simply twisted on or off the facepiece for easy replacement, allowing the easily cleaned facepiece to be reused. Single packs are ready to use and include: pair of 6001 organic vapor cartridges, 2 pair of 5P71 P95 particulate filter, pair of 501 cartridge retainers All 3M Facepiece Respirators can be used with ANY of 3M's vapor cartridges and pre-filter combinations. The simple white, oblong pre-filters are held on to the cartridge with a 501 adapter. All round pre-filters, when used on a vapor cartridge, attach to a 502 adapter. All round pre-filters can also attach directly to a facepiece when only particulate (NOT vapor) protection is required
43.58 USD