suzuki 115 hp 2 stroke outboard page 13

Seloc Publications Johnson/evinrude Outboard, 1971 1989, 2cyl., 1.25 60hp Repair Manual . SELOC Marine tune-up and repair manuals provide the most comprehensive, authoritative information available for outboard, inboard and stern-drive engines, as well as personal watercraft. SELOC has been the leading source of how-to information for the marine industry since 1974. Designed and written to serve the needs of the professional mechanic, do-it-yourself boat enthusiast, instructor and student, these manuals are based on actual teardowns done by Seloc s editors/authors in our on-site facility. Step-by-step illustrated keyed procedures guide you through every conceivable job possible, including all adjustments necessary. This manual covers all Johnson/Evinrude outboards, 1.25-60 h.p., 1 and 2 cylinders from 1971-1989. Every manual features: Easy-to-follow, step-by-step, illustrated procedures Hundreds of exploded drawings, photographs and tables Troubleshooting sections Accurate specifications and wiring diagrams covers all Gasoline Engines and Drive Systems. Over 1,400 illustrations. Provides skill level ratings on all procedures and Special Tool icons where applicable. Separate chapters cover: general information tools and equipment boating safety engine tune-up engine disassembly and reassembly fuel system ignition system electrical system cooling system drive unit tilt and trim systems engine specs torque specs maintenance and off-season storage wiring diagrams Published by Seloc Publications. Softcover.
37.99 USD

Faria Instruments Trim Gauge Dress White Omc Outboard . Trim Gauge, OMC outboard Style: Dress White Size: 2" Weight: .26 Lbs Please note: Image is representative of the Dress White style and is not an image of the actual gauge.
27.99 USD

Faria Instruments Trim Gauge Euro Beige Stainless Steel Omc Outboard . Trim Gauge, OMC Outboard Style: Euro Beige Stainless Steel Size: 2" Weight: .26 Lbs Please note: Image is representative of the Euro Beige Stainless Steel style and is not an image of the actual gauge.
34.99 USD

Faria Instruments Trim Gauge Professional Red Omc Outboard . Trim Gauge, OMC outboard Style: Professional Red Size: 2" Weight: .26 Lbs Please note: Image is representative of the Professional Red style and is not an image of the actual gauge.
31.99 USD

Garelick Auxiliary Outboard Bracket stainless Steel Body . Gets your engine clear of the water when not in use to eliminate propeller drag and to protect the lower unit. Brackets adjust to transoms with plus or minus angles from 7 to 35 in 7 increments. Stainless steel torsion springs counter-balance the weight of the engine and can lock in either Up or Down position. Three-year warranty. HP rating up to 20hp. Maximum weight: 115lbs.; Vertical lift: 11 1/4". Get your engine clear of the water when not in use to eliminate propeller drag and to protect the lower unit Brackets adjust to transoms with plus or minus angles from 7 to 35 in 7 increments Stainless-steel torsion springs counter-balance the weight of the engine and can lock in either Up or Down position Note: Not recommended for 4-stroke engines. See Offshore Auxiliary Outboard Bracket (Model 193328) for 4-stroke applications.
199.99 USD

Garelick Hydra Power Assisted Outboard Engine Brackets 71096:01, 25 To 40hp, Motor Weight Limit: 248 Lbs . Designed to accommodate bigger 2 and 4-stroke engines, the heavy duty 1/2" thick structural aluminum extrusion affords effortless operation - it can raise and lower auxiliary engines in less than 20 seconds. Features 12V self-contained marinized hydraulic actuator, aircraft stainless steel hardware and engineered bronze bushings at pivot points, a 2000lb. tensile strength engine safety cable and a triple coat protective finish. Range of Motion Up/Down: 13-1/4" vertical travel Material: Triple-coated aluminum body, s/s hardware, polypropylene board Attachment Method: Thru-bolt w/ backing plate Power Requirements: 12V Included Equipment: Wiring harness and control switch, 1/2-20 x 4-1/2" s/s mounting hardware Requires: Backing plate, stainless steel nuts & bolts Warranty: Three yearsMODELS: 71095:01 H.P. Rating: Up to 25 Motor Weight Not to Exceed: 148 lbs. Vertical Travel*: 13-1/4" (33cm) Mtg. Pad: Poly/alum Mounting Board Dimensions W x H x T: 15-3/4" x 14" x 2" (40 x 35 x 4cm) Mounting Bracket Dimension W x H: 12-1/4" x 9-1/2" (31 x 24cm) 71096:01 H.P. Rating: 25 to 40 Motor Weight Not to Exceed: 248 lbs. Vertical Travel*: 13-1/4" (33cm) Mtg. Pad: Poly/alum Mounting Board Dimensions W x H x T: 15-3/4" x 14" x 2" (40 x 35 x 4cm) Mounting Bracket Dimension W x H: 16-1/4" x 9-1/2" (41 x 24cm)
1799.00 USD

Garelick Hydra Power Assisted Outboard Engine Brackets 71095:01, Up To 25hp, Motor Weight Limit: 148 Lbs . Designed to accommodate bigger 2 and 4-stroke engines, the heavy duty 1/2" thick structural aluminum extrusion affords effortless operation - it can raise and lower auxiliary engines in less than 20 seconds. Features 12V self-contained marinized hydraulic actuator, aircraft stainless steel hardware and engineered bronze bushings at pivot points, a 2000lb. tensile strength engine safety cable and a triple coat protective finish. Range of Motion Up/Down: 13-1/4" vertical travel Material: Triple-coated aluminum body, s/s hardware, polypropylene board Attachment Method: Thru-bolt w/ backing plate Power Requirements: 12V Included Equipment: Wiring harness and control switch, 1/2-20 x 4-1/2" s/s mounting hardware Requires: Backing plate, stainless steel nuts & bolts Warranty: Three yearsMODELS: 71095:01 H.P. Rating: Up to 25 Motor Weight Not to Exceed: 148 lbs. Vertical Travel*: 13-1/4" (33cm) Mtg. Pad: Poly/alum Mounting Board Dimensions W x H x T: 15-3/4" x 14" x 2" (40 x 35 x 4cm) Mounting Bracket Dimension W x H: 12-1/4" x 9-1/2" (31 x 24cm) 71096:01 H.P. Rating: 25 to 40 Motor Weight Not to Exceed: 248 lbs. Vertical Travel*: 13-1/4" (33cm) Mtg. Pad: Poly/alum Mounting Board Dimensions W x H x T: 15-3/4" x 14" x 2" (40 x 35 x 4cm) Mounting Bracket Dimension W x H: 16-1/4" x 9-1/2" (41 x 24cm)
1699.00 USD

Arco Outboard S . OUTBOARD STARTER
174.99 USD

Service Manual - Johnson/Evinrude - Outboard - 1-2 Cyl - 1971-89 Johnson/Evinrude O/B - 1971-89 - 1-2 CylCovers all 1.25-60 Hp, 1 and 2-cylinder, 2-stroke models.
29.94 USD

Service Manual - Johnson/Evinrude - Outboard - 3-4 Cyl - 1958-72 Johnson/Evinrude O/B - 1958-72 - 3-4 CylCovers all 50-125 Hp, 3-cylinder and V4, 2-stroke models.
29.94 USD